CGSHL - SILICA ON 40 MICRON GLASS BEADS, 58941
- MSDS: CGSHL
- Manufacturer: SUPELCO INC
- Product Name: SILICA ON 40 MICRON GLASS BEADS, 58941
- National Stock Number: 6850-00N084142
Product Identification
Product ID:SILICA ON 40 MICRON GLASS BEADS, 58941
MSDS Date:01/01/1997
FSC:6850
NIIN:00N084142
MSDS Number: CGSHL
Responsible Party
BELLEFONTE, PA 16823-0048
US
Emergency Phone: 814-359-3441
Info Phone: 814-359-3441
Cage: 54968
Contractor
Telephone: 314-771-5765/414-273-3850X5996
Cage: 54968
Ingredients
NON-HAZARDOUS INGREDIENTS
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY IRRITATE EYES AND/OR SKIN.
IRRITATES NOSE AND THROAT. CHRONIC: NONE LISTED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. SKIN: FLUSH WITH LARGE VOLUMES OF WATER. INHAL:
IMMEDIATELY MOVE TO FRESH AIR.
Fire Fighting
Extinguishing Media:THIS MATERIAL IS NOT COMBUSTIBLE. DETERMINED BY
SUPPORTING FIRE. MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT APPLICABLE.
Accidental Release
Spill Release Procedures:SWEEP UP MATERIAL. AVOID GENERATING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN SEALED CNTNR IN COOL, DRY
LOCATION. KEEP AWAY FROM BASES. AVOID GENERATING DUST.
Other Precautions:THIS MATL IS NOT LISTED ON TSCA. THIS MATL IS
INTENDED FOR R&D USE ONLY & MAY NOT BE USED FOR DRUG,
HOUSEHOLD/OTHER PURPOSES. IT IS SUBJECT TO TSCA REGS @ CFR 40 PART
720.36 WHICH DEAL W/EXEMPTION OF CHEMS USED IN RESEARCH AND
(SUPDAT)
Exposure Controls
Respiratory Protection:WEAR NIOSH APPROVED DUST RESPIRATOR.
Ventilation:USE ONLY IN EXHAUST HOOD.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC: DEVELOPMENT FROM PMN (PREMANUFACTURE NOTIFICATION)
REQUIREMENTS. IN ADDN, BURDEN OF SAFE USE OF MATL RESTS WITH YOU
AND, THEREFORE, IT SHOULD BE HNDLD ONLY BY QUALIFIED PERSONS
TRAINED IN LAB PROC & GOOD SFTY PRACTICES.
Chemical Properties
Spec Gravity:2.3
Evaporation Rate & Reference:0
Solubility in Water:0
Appearance and Odor:FINE WHITE POWDER.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG BASES, HYDROFLUORIC ACID.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:NOT APPLICABLE.
Disposal
Waste Disposal Methods:COMPLY WITH ALL APPLICABLE FEDERAL, STATE, OR
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.